# Eltec International

### Power Factor Studies

Power factor is a measurement of how efficiently a facility uses electrical energy. A high power factor means that electrical capacity is being utilized effectively, while a low power factor indicates poor utilization of electric power. However, this is not to be confused with energy efficiency or conservation which applies only to energy. Improving the efficiency of electrical equipment reduces energy consumption, but does not necessarily improve the power factor.

Power factor involves the relationship between these two types of power. Active Power is measured in kilowatts (kW) and Reactive Power is measured in kilovolt-amperes-reactive (kVAr). Active power and reactive power together make up Apparent Power, which is measured in kilovolt-amperes (kVA). This relationship is often illustrated using the familiar "power triangle" that is shown in the following figure.

Power factor is the ratio between active power and apparent power. Active power does work and reactive power produces an electromagnetic field for inductive loads. Using the values in the power triangle example shown above, the facility is operating at 400 kW (Active Power) with an 80% power factor, resulting in a total load of 500 kVA.

Lightly-loaded or varying-load inductive equipment such as HVAC systems, arc furnaces, molding equipment, presses, etc., are all examples of equipment that can have a poor power factor. One of the worst offenders is a lightly loaded induction motor (e.g., saws, conveyors, compressors, grinders, etc.).

End users should be concerned about low power factor because it means that they are using a facility's electrical system capacity inefficiently. It can cause equipment overloads, low voltage conditions, greater line losses, and increased heating of equipment that can shorten service life. Most importantly, low power factor can increase an electric bill with higher total demand charges and cost per kWh.

The power factor in a facility will vary over time. Power factor will also vary with different types of loads, and the overall mix of various types of loads. Inductive loads, such as motors, will tend to reduce the power factor. Linear loads, such as lighting, will tend to increase power factor.